Sign In

Trouble In Choosing Type Of Microcontroller Board Required

sai sruthi sru.sai99@gmail.com India

Hardware: Atmega8 Microcontroller And Gsm900a Modulewith Dc Motor Of 12v,IR Sensors (to Measure Speed Of Dc Motor) Software: Not Yet Decided Sir

can you suggest which microcontroller board should i use to interface both with gsm and dc motor for automatic control of dc motor.

Images

Replies

R Avinash Gupta
2017-02-08 11:34:28
Does it need any other interface like a LCD or something?
R sai sruthi
2017-02-08 11:55:48
yes. with LCD and ir sensors
R sai sruthi
2017-02-08 12:11:47
CAN I USE THE AVR28PIN BOARD WHICH I HAVE SEND YOU AS IMAGE BELOW?
IT'S Features:

Compatible with 28 pin chips like ATmega8,ATmega48,ATmega168, ATmega328 etc.
Atmel AVR ATmega8 28 PIN microcontroller Included.
16 MHz crystal for maximum speed.
All ports available on standard 0.1inch (2.54mm) male headers.
LC Filter on AVcc for clean ADC performance.
Decoupling capacitors on all power pins.
Standard ISP Header (Can be programmed with our USB AVR Programmer v2.0).
On/Off switch.
9-18V DC input.
5v regulated output for supplying extra peripherals.(3x).
Reset Button.
Power Indicator LED.
Free Prototyping area for customization(78 holes at 0.1 inch distance)
FR4 PCB with solder mask and silkscreen.
All PCB Pads tinned.
R Avinash Gupta
2017-02-10 04:44:28
What is the purpose of IR sensor?
R sai sruthi
2017-02-10 10:38:20
ir sensors detect the speed of motor and send signals to microcontroller which will further send signal to gsm. after receiving signal from gsm to mobile, i will be able to control the motor in a wireless operation.

Post a reply to sai sruthi

Think you can help sai sruthi ? Then post your thoughts that might help sai sruthi. You will earn a lot of reputation in the technical community.

If your program is in multiple files, then ZIP the entire folder and attach below

Images and Screenshots

These helps other better understand your suggestion.